# Development Guide for Athens The proxy is written in idiomatic Go and uses standard tools. If you know Go, you'll be able to read the code and run the server. Athens uses [Go Modules](https://golang.org/cmd/go/#hdr-Modules__module_versions__and_more) for dependency management. You will need Go [v1.11](https://golang.org/dl) or later to get started on Athens. See our [Contributing Guide](CONTRIBUTING.md) for tips on how to submit a pull request when you are ready. **All the instructions in this document assume that you have checked out the code to your local machine.** If you haven't done that, please do with the below command before you proceed: ```console $ git clone https://github.com/gomods/athens.git ``` ### Go version Athens is developed on Go 1.11+. To point Athens to a different version of Go set the following environment variable: ```console GO_BINARY_PATH=go1.11.X # or whichever binary you want to use with athens ``` # Run the Proxy We provide four ways to run the proxy on your local machine: 1. Using [Docker](https://www.docker.com/) and [Docker Compose](https://docs.docker.com/compose/) (_we suggest this one if you're getting started_) 2. Natively on your host as a service (only SystemD is currently supported) 3. Natively on your host as a simple binary 4. Using [Sail](https://sail.dev) See below for instructions for each option! ## Run Using Docker As we said above, we suggest that you use this approach because it simulates a more realistic Athens deployment. This technique does the following, completely inside containers: 1. Builds Athens from scratch 2. Starts up [MongoDB](https://www.mongodb.com/) and [Jaeger](https://www.jaegertracing.io/) 3. Configures Athens to use MongoDB for its storage and Jaeger for its distributed tracing 4. Runs Athens You'll need [Docker](https://www.docker.com/) and [Docker Compose](https://docs.docker.com/compose/) installed. Once you do, run the below command to set everything up: ```console $ make run-docker ``` You should see some output that look like this: ```console docker-compose -p athensdockerdev up -d dev Creating network "athensdockerdev_default" with the default driver Creating athensdockerdev_jaeger_1 ... done Creating athensdockerdev_minio_1 ... done Creating athensdockerdev_mongo_1 ... done Creating athensdockerdev_dev_1 ... done ``` After that runs, Athens should be up and running and serving on port 3000. To test it out, run this command: ```console $ curl localhost:3000 ``` ... and you should see the standard Athens response: ```console "Welcome to The Athens Proxy" ``` When you're ready to stop Athens and all its dependencies, run this command: ```console $ make run-docker-teardown ``` ## Run Natively on Your Host as a Service There are many service execution environments. On Linux, two important ones are SystemD and SysV, but at the moment only SystemD is supported; others may follow soon. For other systems, please see the next section. ### SystemD on Linux If you're inside GOPATH, make sure `GO111MODULE=on`, if you're outside GOPATH, then Go Modules are on by default. The Makefile builds the necessary `athens` binary. Then a script sets up the service for you. ```console $ make athens $ sudo ./scripts/systemd.sh install ``` After the server starts, you can manage it as usual via `systemctl`, e.g.: ```console sudo systemctl status athens ``` which is the same as ```console $ sudo ./scripts/systemd.sh status ``` The `systemd.sh` script also has a `remove` option to uninstall the service. SystemD allows logs to be collected and inspected; more information is in [this tutorial by Digital Ocean](https://www.digitalocean.com/community/tutorials/how-to-use-journalctl-to-view-and-manipulate-systemd-logs), amongst others. So tailing the logs can be done like this: ```console $ sudo journalctl -u athens --since today --follow ``` ## Run Natively on Your Host If you're inside GOPATH, make sure `GO111MODULE=on`, if you're outside GOPATH, then Go Modules are on by default. The main package is inside `cmd/proxy` and is run like any go project as follows: ```console $ cd cmd/proxy $ go build $ ./proxy ``` After the server starts, you'll see some console output like: ```console Starting application at 127.0.0.1:3000 ``` ## Run Using Sail Follow instructions at [sail.dev](https://sail.dev) to setup the sail CLI. Then simply run: ``` sail run gomods/athens ``` The command will automatically clone the athens repo and give you a local URL that you can use to open an editor and development environment directly in your browser. ### Dependencies # Services that Athens Needs Depending on its configuration, Athens may rely on several external services (i.e. databases, etc...) to function properly. We use [Docker](http://docker.com/) images to configure and run those services. **However, Athens does not require any of these external services by default**. For example, the default storage driver is memory, but you can opt-in to using the `fs` driver. Neither would require any external service dependencies. But if you'd like to test out Athens against a different storage backend like MongoDB, Minio, or a cloud blob storage system, this section is for you. If you're not familiar with Docker, that's ok. We've tried to make it easy to get up and running with the below steps. 1. [Download and install docker-compose](https://docs.docker.com/compose/install/) (docker-compose is a tool for easily starting and stopping lots of services at once) 2. Run `make dev` from the root of this repository That's it! After the `make dev` command is done, everything will be up and running and you can move on to the next step. If you want to stop everything at any time, run `make down`. > Note: `make dev` only runs the minimum dependencies needed for things to work. If you'd like to run all the possible dependencies, run `make alldeps`. Keep in mind, though, that `make alldeps` does not start up Athens, but **only** its dependencies. > All the services that get started by `make alldeps` are also available in the `docker-compose.yml` file, so if you're familiar with Docker Compose, you can also start up services as you need. # Run unit tests There are two methods for running unit tests: ## Completely In Containers This method uses [Docker Compose](https://docs.docker.com/compose/) to set up and run all the unit tests completely inside Docker containers. **We highly recommend you use this approach to run unit tests on your local machine.** It's nice because: - You don't have to set up anything in advance or clean anything up - It's completely isolated - All you need is to have [Docker Compose](https://docs.docker.com/compose/) installed To run unit tests in this manner, use this command: ```console make test-unit-docker ``` ## On the Host This method uses Docker Compose to set up all the dependencies of the unit tests (databases, etc...), but runs the unit tests directly on your host, not in a Docker container. This is a nice approach because you can keep all the dependency services running at all times, and you can run the actual unit tests very quickly. To run unit tests in this manner, first run this command to set up all the dependencies: ```console make alldeps ``` Then run this to execute the unit tests themselves: ```console make test-unit ``` And when you're done with unit tests and want to clean up all the dependencies, run this command: ```console make dev-teardown ``` # Run End to End Tests End to end tests ensure that the Athens server behaves as expected from the `go` CLI tool. These tests run exclusively inside Docker containers using [Docker Compose](https://docs.docker.com/compose/), so you'll have to have those dependencies installed. To run the tests, execute this command: ```console make test-e2e-docker ``` This will create the e2e test containers, run the tests themselves, and then shut everything down. # Build the Docs To get started with developing the docs we provide a docker image, which runs [Hugo](https://gohugo.io/) to render the docs. Using the docker image, we mount the `/docs` directory into the container. To get it up and running, from the project root run: ``` make docs docker run -it --rm \ --name hugo-server \ -p 1313:1313 \ -v ${PWD}/docs:/src:cached \ gomods/hugo ``` Then open [http://localhost:1313](http://localhost:1313/). # Linting In our CI/CD pass, we use golangci-lint, so feel free to run it locally beforehand: ``` make lint ``` # For People Doing a Release This section is written primarily for maintainers, so we don't forget how to initiate and complete a release. If you're not a maintainer and you're curious how we release new versions of Athens, read on! Take a look at our [releases page](https://github.com/gomods/athens/releases). This is how we release official new builds of Athens. Almost all of the release process is automatic. ## Notes about the release number Before we continue, please be sure you're familiar with our release numbering scheme. We follow the [semver](https://semver.org) convention for our release numbers. At the moment, we're not at `v1`, so release versions are `v0.x.y`. `x` is the `MINOR` number, and `y` is the `PATCH` number. You'll need to decide which one to update. If there are significant new features in this release, choose to update `x` and set `y` to 0. If there are just bugfixes, just increment the `y` version number. ## Code freeze The first step to a release is a code freeze. This is 1-2 weeks (depending on the features and bugfixes we intend to release) during which we don't merge anything but critical bugfixes to the `main` branch. The code in `main` is essentially a release candidate (we don't cut a new branch for RC's at the moment) to test. >If you are doing a patch release, you do not need to do a code freeze. ## Release branch You'll be creating a new branch that represents the code that will be released. It always looks like `release-v0.x.y`. The `v0.x.y` represents the semver version number. >Reminder, the `x` and `y` make up the semver number. `x` is the `MINOR` and `y` is the `PATCH` You'll need to have permissions to create a new branch in origin, whether through the GitHub site or running `push origin release-v0.x.x`. ### Minor releases If you're doing a minor release, you'll be incrementing `x` and setting `y` to 0 in the branch name. For example, if the previous release was `v0.1.2`, the previous release branch will be `release-v0.1.2`. Your new version will be `v0.2.0` and new release branch will be `release-v0.2.0`. Cut minor release branches from the `main` branch. ### Patch releases If you're doing a patch release, you'll be incrementing only the `y` version number. In this case, the new version will be `v0.2.1` and new branch will be `release-v0.2.1`. Cut patch release branches from the most recent release branch. Since these branches will only fix bugs, you'll need to find the commits from `main` that have the fixes in them and cherry pick them into the new patch release branch. For example: ```console $ git checkout -b release-v0.2.1 upstream/release-v0.2.0 $ git cherry-pick .... ``` ### Updating the helm chart see https://github.com/gomods/athens-charts ## Creating the new release in GitHub Go to the [create new release page](https://github.com/gomods/athens/releases/new) and draft a new release. See below for what data to put into the fields you see: - **Tag version** - This should be the same `v0.x.y` number you put into the release branch. Make sure this tag starts with `v` and that the tag target is the proper release branch. - **Release Title** - Make sure the title is prefixed by the release number including the `v`. If you want to write something creative in the rest of the title, go for it! - **Describe this release** - Make sure to write what features this release includes, and any notable bugfixes. Also, thank all the folks who contributed to the release. You can find that information in a link that looks like this: `https://github.com/gomods/athens/compare/$PREVIOUS_TAG...release-$CURRENT_TAG`. Substitute `$PREVIOUS_TAG` for the last semver and `$CURRENT_TAG` to the version in the new release branch When you're done, press the "Publish Release" button. After you do, our Github Actions job will do almost everything. Make sure the Github Actions CI/CD job finished, and check in Docker Hub to make sure the new release showed up in the [tags](https://hub.docker.com/r/gomods/athens/tags) section. ## Finishing up The Github Actions job will do everything except: - Tweet out about the new release - Update the helm chart If you are a core maintainer and don't have access to the `@gomods` account, ask one of the maintainers to give you access. [Here](https://twitter.com/gomodsio/status/1240016379962691585) is an example showing the general format of these tweets. Obviously you should use your creativity here though! Finally, create a pull request from your new branch into the `main` branch. It will be reviewed and merged as soon as possible.